Qlima
  1. Home
  2. Service & Support
  3. Split unit air conditioners
  4. F.A.Q.

Info and support Split unit air conditioners

F.A.Q.

Nethome App

Useful Questions and Answers

Conditions for the best operation of the WiFi module

  •  Ensure that you're aware of your WiFi network security key (WPA key)
  •  The modem/router should be working properly
  •  Ensure that there's a DHCP service (automatic TCP/IP addressing) on your network and it works properly.
  •  In case of a firewall existence on your network, please open the following ports: TCP/28870, UDP/53 (DNS)

How does the WiFi module installation procedure work

Enable the "AP" mode on the air conditioning unit. By activating the AP mode, the unit acts as an Access Point. Create an Nethome account on which you can bind the air conditioning unit(s), so you can manage the unite remotely. Join the air conditioning unit to your home network to have access to the internet.)

Can i use the WiFi module on another compatible air conditioning unit?

Yes, you can.

Can i manage the air conditioning unit through an additional mobile device (simultaneously)?

Yes, you can.

Can i manage the air conditioning unit through 2 different Nethome accounts?

No.

Can i manage more than 1 air conditioning units through the same Nethome account?

Yes, you can.

What happens if i replace my mobile/tablet device, do i have to setup the air conditioning unit from the beginning?

No. You can install the Nethome Plus application on your new mobile/tablet device and log in using your account.

Do i need a static internet ip?

No, the Nethome Plus application works with a dynamic internet IP as well.

Where can I find a manual of the Nethome App

Download the manual here:

Troubleshooting

When i press the "LED" button 7 times, the "AP" indicator doesn't show up on the front panel of the air conditioning device.

Ensure that you have NOT turn the air conditioning device on (from the on/off button of the remote controller)

During the installation procedure i get the “Connecting Hotspot failure” error message.

The network security key you have used, is wrong. Please ensure that you're using the right one.

I'm searching for the Nethome Plus application on the App Store from my iPad but it doesn't show any results.

At the top left corner of your ipad, select "iPhone Only”.

I have lost the white QR Code sticker of the wifi module.

You may scan the QR code located on the surface of the Wifi module.

I can't operate the air conditioning device remotely, the status is Offline.

  •  Ensure that the air conditioning unit power cord, is connected to the power source.
  •  The air conditioning unit didn't get the command from the Nethome Plus application, please try again.
  •  Please move the modem/router closer to the air conditioning unit in case of wifi signal loss.
  •  The internet connection of your modem/router is down.
  •  Please disconnect the power of the air conditioning unit and reconnect again.

I forgot my password

In the initial screen of the Nethome Plus application select (right down) “Forgot Password?” and then select “Send retrieve password email”

I haven't received the confirmation mail for the "create my account".

  • In the initial screen of the Nethome Plus application select (right down) “Forgot Password?” and then select “Resend Activation email”
  • Control whether you have received the mail as a junk (SPAM).
Compare